Items: 0 Total: £0.00

Expert Advice

Consumer Unit World Expert Advice

Delivery Information

Consumer Unit World Delivery

Visit Other Worlds Today!

Extractor Fans
Socket World
Lightbulb World
Home > Products by Brand > Hager > Hager Consumer Units > Flush Consumer Units

Hager VMLF110 Flush Consumer Unit 10 Way

Specification
Amendment 3 metal consumer unit
Number of Ways: 10 Way
Supplied with: 100A Main Switch
Hager code: VMLF110
Dimensions
Width: 298mm
Height: 282mm
Depth: 72mm
Profile: 32mm with cover

Part of Hager's 'Design 10' range the VMLF110 provides a discrete domestic circuit protection solution. It is designed to be recessed into the cavity wall so that only the front cover is visible, protruding just 32mm. 

Supplied with 100a Mains switch and offering 10 usable ways it may be populated with 1 x RCD and 8 x MCBs or a full bank of 10 x RCBOs for total circuit isolation and 17th Edition compliance.

Inside a Flush Consumer Unit

1. Cable Clamps: Cable clamps come as standard on our flush fit boards to help with securing the tails in place inside the board.

2. Adjustable Depth: To allow for a range of installation depths within a wall, the frame is adjustable. There are flanges on the frame which sit on the finished surface of the wall, helping to ensure that the devices always protrude through the front cover a uniform amount, helping to maintain the IP rating of the board.

3Knockouts: on the top, bottom, sides and rear of the back box allowing multiple cable entry options. Raised sides on the box give a reference for plasterboarding. Oval knockouts can be protected with 38mm open grommet.

4. Installation Depth: The full metal DIN rail comes with extra support to allow the frame to be adjustable for depth. This allows the board to be installed at a range of depths into the wall. The minimum depth is 72mm allowing for 60mm of studwork and 12mm of plasterboard.

5. Removable Frame: The frame contains all of the devices, neutral and earth terminations and the cable clamp. This can be removed whilst the building work is completed and quickly re-installed into the back-box later. It is then secured with the use of the 4 wing nuts removing the need for any special tools.
 
Hager VMLF110 Flush Consumer Unit 10 Way 100a Main Switch amendment 3
£66.78 ex vat
£80.13 inc vat

We have over 21 years' experience in supplying electrical materials to both trade and end user customers.
Visit New Worlds Today! - Light Bulbs - Extractor Fans - Switches & Sockets