 | | 18th Edition Regulation 421.1.7 Arc-Fault Protection compliant |
| | Amendment 3 non-combustible, metal enclosure |
| | Supplied with 100A main switch and 2x 100A RCCBs |
| | Double pole busbar system |
| | Conforms to BS EN 61439-3 |
Width:
Height
Depth:
Enclosure:
Colour: | 472mm
480mm
102.5mm
Steel
White | Type:
Brand:
Range:
MPN:
EAN: | 9+10 Way Split Load
Hager
Design 30 Arc Fault Protection
VMA90910HK
5015652604310 |
Arc-Fault Detection Devices are a new fire prevention module from Hager. Designed to identify electrical arcing within cabling, both parallel and series, caused by trapped, damaged or crushed cables or poor termination, rodent damage or general deterioration. Microprocessors within the device continually analyse the circuit and very quickly shut down if an arc is detected, before they can cause a fire within your property. With a new regulation recommending installation of these devices in a number of AC circuits, it is likely that these AFDD devices will become mandatory in the near future, so now is the perfect time to consider getting ahead of the curve with regard to safety and future-proofing your Circuit Protection.
